Polaris Outlaw 9922483 - Manual (Page 70)

66
Operation
Starting the Engine
The engine can be started when the transmission is in neutral, or while in gear if the clutch is
disengaged. If starting a warm engine, do not use the choke.
Fuel is injected into the intake passage each time the throttle lever is depressed. Do not
depress the throttle lever while starting the engine. Do not depress the throttle lever when the
engine is stopped.
NOTICE: Operating the ATV immediately after starting could cause engine damage. Allow the engine
to warm up for several minutes before operating.
1. Shift the transmission to neutral.
2. Lock the parking brake. Turn the
fuel valve on.
3. Sit on the vehicle. Disengage the
clutch.
4. If the engine is cold, pull the
choke knob out until it stops. Do
not use the choke if starting a
warm engine.
Full On
Off
Choke Knob