Polaris Outlaw 9922483 - Manual (Page 103)

99
Maintenance
Engine Oil Change
1. Position the vehicle on a level surface.
2. Remove the skid plate for better access to the
oil drain plug and short screen.
3. Start the engine. Allow it to idle for two to three
minutes. Stop the engine.
4. Place a drain pan beneath the crankcase.
Remove the drain plug. Allow the oil to drain
completely.
CAUTION! Hot oil can cause burns to skin. Do not allow
hot oil to contact skin.
5. Clean the crankcase sealing surface and the
drain plug (with magnet) thoroughly.
6. Replace the sealing ring. Reinstall the drain
plug. Torque to 15 ft. lbs. (20 Nm).
Drain Plug