Polaris Outlaw 9922483 - Manual (Page 156)

152
Maintenance
Front Suspension
Suspension Set-Up
1. Position the vehicle on a level surface.
2. Stop the engine.
3. Elevate the front of the vehicle by placing
a suitable stand under the frame. The tires
should be barely touching the ground and
the suspension should be at full rebound.
4. Measure the distance from the ground to
the bottom of the lower front bumper bolt.
Note this measurement for later use.
5. Remove the stand and have a rider sit
comfortably on the seat with hands on the
handlebars.