Polaris Outlaw 9922483 - Manual (Page 163)

159
Maintenance
Rear Suspension
Compression Damping
The compression damping clickers are located on the
bottom of the shocks (on the lower clevis). Use a
screwdriver to make adjustments.
To set the shock at the firmest setting, turn the screw
clockwise until it stops (fully closed position). From
this position, turn the screw counter-clockwise to
decrease compression damping.
Setting Compression Damping
Softest 24 clicks from closed
Factory 8 clicks from closed
Firmest 2 clicks from closed
Compression
Adjustment