Polaris Outlaw 9922483 - Manual (Page 150)

146
Maintenance
Toe Alignment
Use the following procedure to check the toe alignment of the vehicle. The vehicle is
designed for a neutral toe setting.
WARNING! Severe injury or death can result from improper toe alignment and adjustment. Do not
attempt to adjust tie rod alignment. All tie rod adjustments should be performed by an authorized
Polaris dealer.
1. Position the vehicle on a level surface. Ensure the vehicle is at the proper ride height by
placing a rider on the vehicle.
2. Place the handlebars in a straight-ahead position. Secure the handlebars in this position.
3. Place a chalk mark on the center line of the front tires approximately 10" (25.4 cm) from
the floor, or as close to the hub/axle center line as possible. Make sure both marks are the
same distance from the floor.