Polaris Outlaw 9922483 - Manual (Page 159)

155
Maintenance
Front Suspension
Spring Preload
1. Raise and safely support the front of the vehicle
off the ground to allow the suspension to fully
extend.
2. Loosen the jam nut.
3. Turn the adjusting ring clockwise to increase
preload. Turn the ring counter-clockwise to
decrease preload.
4. Tighten the jam nut firmly against the adjusting
ring.
5. Measure the preload of the left and right
shocks. Make sure both shock measurements
are equal.
Adjusting
Ring
(lower)
Jam Nut
(upper)
Increase
Preload
Decrease
Preload