Replacing the rtm isdn 1500, Replacing the rtm isdn 1500 -5 – Polycom RMX DOC2557C User Manual
Page 33
Polycom RMX 1500 Hardware Guide
2-5
Replacing the RTM ISDN 1500
1
Ensure that the power switch on the RMX 1500 is turned OFF (O).
2
Remove the PRI cables.
3
Loosen the captive screws that fasten the card to the MCU.
4
Remove the RTM ISDN card and pull the RTM ISDN card out of its
slot in the backplane.
5
Carefully slide the RTM ISDN card out through the rear panel.
6
Slide in the replacement RTM ISDN card into it’s slot.
7
Tighten the captive screws on each side of the rear panel of the card,
securing the RTM ISDN card to RMX.
8
Connect the PRI cables.
9
Turn ON the RMX 1500.
See also other documents in the category Polycom Computers:
- DOC2564A (20 pages)
- SpectraLink SVP020 (51 pages)
- PDS 725-78600-002A2 (32 pages)
- PathNavigator (2 pages)
- DOC2558B (45 pages)
- SpectraLink SVP010 (47 pages)
- SpectraLink SVP100 (40 pages)
- 3725-32870-002 (78 pages)
- RMX DOC2551A (20 pages)
- DOC2559B (65 pages)
- DOC2560A (188 pages)
- DOC2565A (2 pages)
- RMX DOC2554A (2 pages)
- DOC2562A (20 pages)
- KIRK 623128UK (2 pages)
- DOC2566A (2 pages)
- DOC2553A (2 pages)
- SpectraLink 1725-36028-001 (110 pages)
- DOC2232A (132 pages)
- KIRK 623152UK (2 pages)
- KIRK KWS300 (60 pages)
- DOC2558C (45 pages)
- DOC2557B (29 pages)
- RMX DOC2567A (2 pages)
- KIRK KWS1500 (48 pages)
- KIRK 1416 8711 (6 pages)
- DOC2559A (65 pages)
- RSS 2000 (24 pages)
- RSS 2000 (36 pages)
- DOC2547A (42 pages)
- 3150-16966-002 (167 pages)
- KIRK KWS8000 (38 pages)
- KIRK Wireless 600v3 KWS600v3 (220 pages)
- 3725-32871-002/A (13 pages)
- 3725-18101-001B (28 pages)
- V4.0 INTEGRATION RMX 1000 V1.1.1 (23 pages)
- 3150-30828-001 (14 pages)
- DOC2560C (188 pages)
- DOC2557A (29 pages)
- RSS 2000 V1.0 (11 pages)
- RMX DOC2579D (160 pages)
- DOC2558A (45 pages)
- DOC2585A (160 pages)
- RMX DOC2560B (188 pages)