Polycom RMX DOC2557C - Manual (Page 14)

Chapter 1-Hardware Description
1-10
• Using a shelf
—
Install the shelf supplied by the rack manufacturer, in the rack.
—
Mount the RMX on the shelf.
—
Fasten the RMX to the rack with screws through the four holes in
the RMX’s front mounting brackets.
Connecting the RMX 1500 to a Power Source
The following restrictions apply to the conductors and connectors that
may be used to ground the unit when rack mounted:
•
When using bare conductors, they must be coated with an
appropriate antioxidant compound before crimp connections are
made. Tinned, solder-plated or silver-plated connectors do not have
to be prepared in this manner.
• The same bolt assemblies should not secure multiple connectors.
• Listed fastening hardware must be compatible with the materials
being joined and must be preclude loosening, deterioration and
electrochemical corrosion of the hardware and joint materials.