Polaroid PDC 2300Z - Manual (Page 39)

35
Setting the date and time
Note: You can reset the date and time on your camera as
necessary.
1 Turn on the camera.
2 Rotate the Mode knob to the SETUP setting.
The SETUP menu appears in the LCD.
3 Rotate the Zoom control left or right to highlight the
Date/Time menu option.
4 Press the OK button.
The DATE/TIME menu appears in the LCD.
5 Rotate the Zoom control to change the value of the
highlighted part of the date and time you want to
change.
As you finish each date and time setting, press the OK
button to move to the next setting.
6 When you finish changing all desired date and time
settings, repeatedly press the OK button to scroll
through the remaining settings and return to the
SETUP menu.
The date and time settings are saved when you return to
the
SETUP menu.
7 Rotate the Zoom control left or right to highlight any
other Setup option that you want to configure, and
press the OK button to display its menu. See the
appropriate section in this book for details about each
SETUP menu option.