Programmable features, Features (base unit), Base unit programming – Panasonic KX-FPG381 User Manual
Page 70: Basic features, 1 base unit programming, 2 basic features, 1 programming basic features, 2 programming advanced features
8. Programmable Features
68
8 Programmable Features
Features (Base Unit)
8.1 Base unit
programming
Helpful hints:
L
To exit programming, press {MENU} any
time.
8.1.1 Programming basic
features
1
Press {MENU}.
2
Select the feature you wish to program.
Press {<} or {>} repeatedly to display the
desired feature.
L
The current setting of the feature will be
displayed.
3
Press {A} or {B} repeatedly to display the
desired setting.
L
This step may be slightly different
depending on the feature.
4
Press {SET}.
L
The setting you selected is set, and the
next feature will be displayed.
5
To exit programming, press {MENU}.
8.1.2 Programming advanced
features
1
Press {MENU}.
2
Press {<} or {>} repeatedly to display
“ADVANCE SETTINGS”.
3
Press {SET}.
4
Select the feature you wish to program.
Press {<} or {>} repeatedly to display the
desired feature.
L
The current setting of the feature will be
displayed.
5
Press {A} or {B} repeatedly to display the
desired setting.
L
This step may be slightly different
depending on the feature.
6
Press {SET}.
L
The setting you selected is set, and the
next feature will be displayed.
7
To exit programming, press {MENU}.
Programming by entering the program
code number directly
You can select a feature by directly entering the
program code (# and a 2-digit number) instead of
using {<} or {>}.
1. Press {MENU}.
2. Press {#} and the 2-digit code number
3. Press {A} or {B} repeatedly to display the
desired setting.
4. Press {SET}.
5. To exit programming, press {MENU}.
8.2 Basic features
Code #00: Setting the Quick Setup
QUICK SETUP
PRESS SET
See page 21 for details.
Code #01: Setting the date and time
SET DATE & TIME
PRESS SET
See page 29 for details.
Code #02: Setting your logo
YOUR LOGO
PRESS SET
See page 30 for details.
Code #03: Setting your fax number
YOUR FAX NO.
PRESS SET
See page 32 for details.
Code #04: Printing a sending report
SENDING REPORT
MODE=ERROR
[
±]
To print a sending report for fax transmission
results (page 51).
{
SET}
{
MENU}
{<}{>}{A}{B}
0519_FPG381.book Page 68 Monday, May 19, 2003 6:46 PM