ParaBody 425103 - Manual (Page 13)

13
0 1 2 3 4 5 6
1/2 1/2 1/2 1/2 1/2 1/2
STEP 13
• LOOSELY assemble the TOP BOOM (17) to the top of the REAR UPRIGHT (4) using two 1/2 X 4” BOLTS (88) two 1/2”
WASHERS (93) and one 1/2” LOCK NUT (94). See FIGURE 13.
FIGURE 13
• SECURELY assemble one 3/8” SPRING PIN ASSEMBLY (51) to the SPRING PIN HOUSING on the FRONT UPRIGHT (25) as
shown in FIGURE 13.
• Attach one 3-PRONG KNOB (61) the FRONT UPRIGHT (25) as shown in FIGURE 13.
• Assemble two ROLLER PADS (37) to the FRONT UPRIGHT (25) using one 3/4 OD X 16” TUBE (34) and two STARLOCK
COLLARS (50). See FIGURE 13.
37
17
50 51
1/2 X 4” 88
93
94
34
61
25
37
50
4