Panasonic AG-TL950 - Manual (Page 25)

25
4-7 Contents of Menu Switches
[ ]: Factory setting • The lower section in the items and set values columns shows what’s on the VCR’s display.
4 ON-SCREEN/MENU SWITCHES
Function Screens Items Set values
CNT TAPE END [OFF]
500
1000
..
.
9500
OFF
500
..
.
9500
Outputs a tape end signal from the rear panel’s [TAPE END OUT] terminal
when the tape reaches the set tape reel counter value during recording.
During series recording, a series recording signal is output to a connected
VCR for continuous recording.
OFF: The counter end output function is disabled.
500 : A tape end signal is output when the set tape reel counter value is
reached during recording. A buzzer sounds when the menu switch
on the is set to “ON”.
For more information on the relationship between the tape reel
counter value and the tape remaining time, refer to page 55.
SR ET 2
..
.
9500
SR ET 3
ALARM/ REC MODE [OFF]
SENSOR ALARM
MODE SENSOR
AL/SENSOR
OFF
ALAR
SENS
ALKS
Selects the alarm recording or sensor recording function.
• Alarm recording: When an alarm signal is input to the rear panel’s
[ALARM IN] terminal during recording, the mode switches to the 2H/6H/
L12H/L18H/L24H/24H/48H/NORMAL or 6H (EP) recording mode for
realtime recording of the alarm event.
• Sensor recording: When an alarm signal is input to the rear panel’s
[ALARM IN] terminal in the Stop mode (Stop mode, Timer Recording
Standby or Operating Off mode), recording starts in the 2H/6H/L12H/
L18H/L24H/24H/48H/NORMAL mode.
OFF: Alarm or sensor recording is not executed.
ALARM: Alarm recording is executed.
SENSOR: Sensor recording is executed.
AL/SENSOR: Both alarm and sensor recording are executed.
AL SE 1
SRI/EXT SRI/EXT REC [OFF]
MODE SERIES
EXT
OFF
SERi
EiT
Selects series recording or automatic recording with an external VCR activation
signal.
OFF:
The series recording and automatic recording with an external
signal functions are disabled.
SERIES: The series recording function is enabled.
EXT:
The automatic recording function with an external signal is enabled.
* When the menu switch is set to “ON”, externally
activated recording is not executed.
EXT REC END [NORMAL]
POWER OFF
NORn
POFF
Selects the mode engaged when externally activated automatic
recording ends.
NORMAL:
The Stop mode is engaged.
POWER OFF: The Stop mode is engaged and the operating power
mode is turned off.
REPEAT REC [OFF]
ON
OFF
ON
VTR MODE
Enables or disables the repeat recording function.
OFF: The repeat recording function is disabled.
ON: When the tape ends, it is automatically rewound and recording
starts again from the beginning. When set to “ON”, the [REPEAT]
indication on the VCR’s display lights.
* If the menu switch on the
MODE> screen is set to “STOP”, the Stop mode is engaged when
the tape ends even when there is an alarm or sensor recording. The
repeat recording is not executed.
* When this menu switch is set to “ON”, externally activated recording
is not executed.
VTR 7
(VCR's display)
SR ET 1