Planet Technology Internet Telephony PBX System IPX-300 Series - Manual (Page 66)

STEP 7:
Browse to “Port Status” configuration menu. Fill in the auto attendant number 555 to all of ports.
( Where 555 is the auto-attendant number of IP PBX )
Figure D-17. Hot Line to auto-attendant of IPX-300W
STEP 8:
After all of devices have registered to IP PBX successfully, the Extension Status page will show
the registration status:
Figure D-18. Extension status page with Phone and Gateway registered
¾ Test the Scenario:
1. VIP-154T pick up the telephone
2. Dial the number: 0 shall be able to connect to the port 1 of VIP-480FO
3. Then the telephone will hear the dial tone from PSTN lines, and dial the number: 12345678
shall be able connect to the User A.
4. Then the telephone of User A will ringing, User A can pick up the handset and talk with
VIP-154T.
5. Both VIP-154T and User A hang up the calls.
6. User A pick up the telephone and dial the number: 23456789 should be able to connect to the
Auto Attendant System of IP PBX.
7. The User A will hear the prompts, and dial the extension number: 100 shall be able connect to
the VIP-192.
8. Then the VIP-192 should will ringing, and it to pick up the call then talk with User A.
66