Factory default, Admin account – Planet Technology Internet Telephony PBX System IPX-300 Series User Manual

Page 55

Factory Default

This function is used to restore all the parameters back to factory default setting. You can use the

Save/Restore Setting to check the factory default configuration, after you click on the Set button.

Figure 5-6. Factory default settings

Admin Account

You can upgrade the firmware of the device using this tool. Make sure that the firmware you want to use

is saved on the local hard drive of your computer. Click on Browse to search the local hard drive for the

firmware to be used for the update. Upgrading the firmware will not change any of your system settings

but it is recommended that you save your system settings before doing a firmware upgrade.

Figure 5-7. Firmware update settings

Firmware Name

Select that you want to upgrade Firmware version.

Table 5-5. Firmware update description