Planet Technology Internet Telephony PBX System IPX-300 Series - Manual (Page 35)

Authentication
Method
Select OPEN, WPA, WPA-PSK, WPA2, WPA2-PSK, WPA/WPA2
mix mode, WPA-PSK/WPA2-PSK mix mode .Default is OPEN
mode.
Table 4-5. AP mode description
Example:
Figure 4-13. AP mode application
¾ AP-Client Mode
In this mode the IP PBX is used to access the Wireless Service Provider network by connecting
wirelessly to the remote (Outdoor AP).
When the IPBX operate in AP-Client Mode, the WAN and LAN RJ-45 interface will be configured as a 2
port switch for connecting with 2 PCs for access wireless network
Figure 4-14. AP-client mode settings
35