Verify registered voice and video devices, Verify registered voice and video devices –6 – Polycom 4300T User Manual
Page 76
User Guide V
2
IU 4300T Converged Network Appliance
4 - 6
Verify Registered Voice and Video Devices
The 4300T maintains a list of all registered voice and video devices called a
clients list so that it can properly route voice and video calls. At startup, voice
and video devices register their IP addresses with the 4300T. The 4300T then
registers on behalf of the voice and video devices by providing its own WAN
IP address to the softswitch, gatekeeper, or IP PBX. If a user or network
operator reconfigures the IP address of the voice or video device (ie. an IP
phone or IAD), it will re-register the new address with the 4300T. In this
instance voice and video calls may be routed improperly because the 4300T
clients list contains out of date information.
To update the clients list simply highlight and delete the stale entry using the
following steps:
1.
Select System.
2.
Select System Overview.
3.
Select Clients List.
4.
Proceed to the appropriate signaling section, highlight the duplicate
entry or entries and press the delete key on the keyboard
5.
Press Submit.
6.
Restart the VoIP ALG by following the instructions found in
.