Modify an existing vlan configuration, Delete an existing vlan configuration – Polycom 4300T User Manual
Page 34
User Guide V
2
IU 4300T Converged Network Appliance
3 - 16
— 802.1 mode: Assign the port to any ONE VLAN.
— 802.1q mode: Assign the port to any number of VLANs
Perform steps 1 through 6 above for each VLAN you wish to create.
Modify an Existing VLAN Configuration
1.
Select the Network link.
2.
Select VLAN Settings.
3.
Change the desired settings.
4.
Press the Modify to modify the VLAN. The Reset button will restore the
input area being modified to its previous value.
Delete an Existing VLAN Configuration
1.
Select the Network link.
2.
Select VLAN Settings.
3.
Press the trash can icon next to the VLAN you wish to delete.