Panasonic DMR-EZ37V - Manual (Page 54)

54
RQT8849
The types of transmission:
,  to select “Antenna” or
“Cable”,
then
ENTER
Automatic Clock and Channel Settings
Please select the wire connected to RF IN.
Cable
Antenna
ENTER
Confi rm the time, then
ENTER
– DST (Daylight Saving Time) shows the
summertime setting.
– Time Zone shows the time difference from
Greenwich Mean Time (GMT).
See “Notes”
( right)
Set Clock Automatically
Clock Setting completed successfully.
4/4/2007 11:15 AM
DST----------- On
Time Zone---- EST
ENTER
Tips
 If the unit displays “No channels were found.”, turn off the unit
and confi rm the cable or antenna input is connected to the RF IN
terminal. Restart the set up again ( below).
 If “Auto Clock Setting is incomplete.” is displayed, press
[ENTER] and set the clock manually ( right).
 If the clock is not correct, set the clock with “Adjust Time Zone” or
“Set Clock Manually” ( 40).
 You can delete channels you don’t need after completing Auto
Channel Setting ( 55).
Restarting the Auto-Setup
(after relocation, for example)
1. When the unit is on and stopped, press and hold [CH
] and
[CH ] on the main unit at the same time for about 5 seconds.
The unit turns off.
2. Press [ DVD/VHS POWER] to turn the unit on.
(The signal source and channel captions revert to their default
values. All scheduled recordings are cleared.)
 To cancel in the middle
Press [RETURN].
Manual Clock Setting
Perform steps 1–6 on page 53.
,  to select the item you want
to change.
Set Clock Manually
/ : / SAT AM
Month Day Year Hour Minute
1 1 12 00 2000
DST Time Zone
Off EST
ENTER
,  to change the setting.
– Repeat steps 7–8 to change other items.
ENTER
to confi rm new date and
time and to initiate the clock.
Notes
 The automatic clock setting can take a few minutes.
 The channel and clock settings apply to both DVD and VHS drives.
 Time Zone
EST (Eastern Standard Time)  GMT 5
CST (Central Standard Time)  GMT 6
MST (Mountain Standard Time)  GMT 7
PST (Pacifi c Standard Time)  GMT 8
AST (Alaska Standard Time)  GMT 9
HST (Hawaii Standard Time)  GMT 10
For other areas: xx hr
 DST (Daylight Saving Time)
If you select “On”, the clock is advanced one hour beginning at
2 a.m. on the second Sunday in March and ending at 2 a.m. on the
fi rst Sunday in November.
Set the DST period manually when it varies according to regions
( below).
To set the DST period manually
1. Press [FUNCTIONS].
2.
,  to select “Other Functions” then press [ENTER].
3. ,  to select “Setup” then press [ENTER].
4. ,  to select “Setup” then .
5. ,  to select “Clock Settings” then press [ENTER].
6. ,  to select “Set the time change dates for DST” then press
[ENTER].
7. ,  ,  to set the “Month”, “Day”, “Hour”, and “Minute” then
press [ENTER].
Setup
Setup
Audio
Display
TV Screen
VHS
Set the time change dates for DST
Channel
Disc
Video
: SUN 2nd AM
Month
Beginning
End
Day Hour Minute
3 2 00
: SUN 1st AM
Month Day Hour Minute
11 2 00
ENTER
Restore Default
Reinitializes the
settings.
Setting the Channels and Clock
ENTER
to start automatic channel/
clock setting.
Notes
 Conditions of the received channel may cause automatic channel/
clock setting to take extra time.