Panasonic DMR-EZ37V - Manual (Page 26)

26
RQT8849
Advanced Video Cassette Playback
Stereo  Mono L  Mono R
 No display (Normal audio track) 
Changing Audio during Playback
AUDIO
repeatedly, to select the audio
option.
Tips
Auto Bilingual Selection Function [VHS]
When a stereo broadcast or multi lingual broadcast is recorded
and played back on the unit, stereo sound will be automatically
selected in the case of a stereo broadcast and SAP sound will be
automatically selected in the case of a multi lingual broadcast.
– This function may not work properly if the program is played back
from a mid point. In a case like this, press [AUDIO] and select the
right sound.
– The function will not work with a cassette which has been recorded
from the external equipment.
Notes
Remaining tape time display
 The displayed time is approximate.
 The displayed time will be incorrect if you set the wrong tape
length in “Select Tape Length” in the Setup menu ( 43) and if the
tape is of poor quality.
On-screen Display Indicators
STATUS
to display on-screen indicators.
VHS
Mono L
0:00.22
SP
 VHS drive indicator
 Shows which sound mode is selected as follows:
Stereo:
Hi-Fi stereo audio
Mono L: Mono L audio of the Hi-Fi stereo
audio
Mono R: Mono R audio of the Hi-Fi stereo
audio
No indicator: Normal audio
 Operation status
 Shows the tape counter and remaining tape time
Pressing [STATUS] to cycle the display as follows:
No display  Tape counter
 Remaining tape time 
 Press [ CANCEL] to reset the tape counter
(elapsed time) to “0:00.00”. The tape counter
is automatically reset when inserting a video
cassette.
 Video cassette-in indicator
 Recording mode ( 14)
Tips
To exit on-screen indicators
Press [STATUS] several times.
The following on-screen indicator will not be displayed
when this unit is connected to the TV with the DVD
PRIORITY output terminal. This indicator is only
displayed when playing a tape in the VCR. The items
displayed may differ depending on the operating
conditions.