ProForm DVDR3570H - Manual (Page 38)

English
38
Record TV Programme
(continued)
About timer recording
Use the timer recording to automatically
start and stop a recording at a later date/
time. This recorder tunes to the right
programme channel and begins recording
at the specifi ed time.
With this recorder, you can schedule up
to 40 recordings at a time and up to 6
(six) hours for each recording. During
timer recording, changing the recorder’s
channel is not possible.
Note: If the scheduled timer recording
is longer than 6 (six) hours, it splits into
two or more titles.
There are two ways to program a
timer recording
– Using the VIDEO Plus+
– Using manual timer programming
SUBTITLE
INFO SELECT EDIT SCART
AUDIO
PAUSE LIVE TV TIMER
(VIDEO Plus+)
OK
About ‘VPS/PDC’
‘VPS’ (Video Programming System) or
‘PDC’ (Programme Delivery Control) is
used to control the start and duration of
TV channel recordings. If a TV
programme starts earlier or ends later
than was scheduled, this recorder will
then turn on and off at the correct time.
Timer recording (VIDEO
Plus+ system)
This is a simple timer programming
system. To use it, enter the VIDEO Plus+
programme number associated with your
television programme. You can fi nd this
number in your TV listings magazine.
A Turn on the TV to the correct viewing
channel for the recorder.
B Press TIMER (VIDEO Plus+) on the
remote control.
The timer menu appears.
Start time
Stop time
Date
Channel
Title name
Repeat
VPS/PDC
Recording target
New Timer VIDEO Plus+
Timer details List of timers
C Press the Blue button on the remote
control for { VIDEO Plus+ }
The VIDEO Plus+ entry menu
appears.
VIDEO Plus+ System
Enter VIDEO Plus+ program number :
Clear Store Cancel
D Use the alphanumeric keypad 0-9 to
enter the VIDEO Plus+ programme
number (e.g. 5-312-4 or 5,312 4, key in
‘53124’).
To clear the programming number, press
the Red button for { Clear }.