Pentax Optio P70 - Manual (Page 114)

112
3
Ta
king
Pict
ures
3
Use the four-way controller (45)
to select O (On) or P (Off).
O (On) Blink Detection function works.
P (Off) Blink Detection function does
not work.
The setting is saved.
4
Press the 3 button.
The camera returns to capture status.
You can set this function to correct for camera shake during shooting. If
you set Pixel Track SR, the camera automatically corrects any camera
shake in the images you shot. The default setting is [Auto].
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Pixel Track
SR].
3
Press the (5) button.
A pull-down menu appears.
4
Use the four-way controller (23)
to select [Auto] or [Off].
Auto Automatically corrects for
camera shake.
Off No correction for camera
shake.
5
Press the 4 button.
The setting is saved.
Blink Detection 1p.67
Setting Pixel Track SR
Rec. Mode
MENU Exit
2 / 3
Instant Review 1sec.
Memory
Movie
Blink Detection
Digital Zoom
EV Compensation 0.0
Rec. Mode 1 / 3
Recorded Pixels
Pixel Track SR
White Balance
AE Metering
Sensitivity
Focusing Area
12 M
AWB
Auto
MENU Cancel OK OK
Auto
Off