Philips DSX 5540 - Manual (Page 18)

Setup Wizard
18
If your equipment has been professionally installed, skip this first
time setup section and go to page 19.
After the DIRECTV® Receiver has been connected to your compo-
nents, it is time to turn the DIRECTV Receiver on.
1. Press the SAT button on the remote control. The LED will
blink.
2. Press the POWER button on the remote control.
3. Use the ▲▼ buttons to select your preferred language of the
on screen menus and guide and press OK.
4. When the Welcome screen displays, press the OK button on
the remote control to start the Setup Wizard. The Setup
Wizard is a first time setup that automatically steps you through
the installation process. This screen will ONLY appear the very
first time your DIRECTV Receiver is turned on.
a. Enter the ZIP code.
Note: The ZIP code is critical to point your dish accurately
(refer to page 32).
b. Configure the dish (refer to page 32).
c. Point the dish (refer to page 32).
d. Test the System (refer to page 33).
5. After you have installed your DIRECTV System, you should
contact DIRECTV to order DIRECTV ® programming at
1-800 DIRECTV (1-800-347-3288).
Select a preferred language for the
text display in the menus and
program guide.
Seleccione un idioma para ver el
texto de los menúes y la guía
de programa.
English
Spanish
Welcome
Follow these 4 easy steps and
be on your way to enjoying a
new viewing experience.
Select OK to go the
Setup Wizard.
Skip the Setup Wizard
by pressing down then OK.
Go to Setup Wizard
Skip Setup Wizard
DSX5500_5540 11/13/02 12:21 PM Page 18