Remote control (cont’d), Vcr/dvd functions – Philips DSX 5540 User Manual
Page 17
![background image](/manuals/178651/17/background.png)
Remote Control (cont’d)
17
VCR
Press to put the remote control in VCR
mode. LED will blink when other buttons
are pressed while in VCR mode.
REWIND
VCR - When tape playback is stopped,
press to rewind at high speed. During tape
playback, press to rewind the tape while
the picture stays on the screen.
DVD - Press and release to select previous
chapter. Press and hold to scan
backwards.
STOP
Press to stop the tape or disc.
RECORD (VCR only)
Press once to start a recording.
0-9
Allows direct number entry for tuning to
a channel or chapter.
POWER
Press to turn VCR or DVD player on
or off.
DVD
Press to put the remote control in
DVD mode. LED will blink when other
buttons are pressed while in DVD
mode.
FF
VCR - When tape playback is stopped,
press to advance the tape at high speed.
During tape playback, press to advance
the tape while the picture stays on the
screen.
DVD - Press and release to select next
chapter. Press and hold to scan
forward.
PLAY
Press to play a tape or disc.
PAUSE
Press to pause a tape or disc.
CH+/CH- (VCR only)
Change channel up or down
Once programmed (refer to page 14), your DIRECTV
®
Remote Control should control certain functions of your VCR
or DVD. Be sure to press the VCR or DVD button before operating each unit.
VCR/DVD Functions
Note: All features on your VCR or DVD player may not be supported by this remote.
DSX5500_5540 11/13/02 12:21 PM Page 17