Philips DVDR615 - Manual (Page 57)

57
English
3139 246 14221
Accessing to the Preferences
options
1
Switch on the TV set. Select the correct
Video In channel at the TV.
2
Press SYSTEM-MENU on the remote
control.
➜
The system menu appears on TV.
3
Press 4 to select { Preferences .}
Navigate to menu item
[SYSTEM] = Exit
Recording YesDVD Sound Disc
STOP
Preferences
Set-up
4
Press 2 repeatedly to select one of the
options from { Preferences } and press 4
to select to a setting you want to adjust.
➜
Instructions for adjusting the settings
are provided in the following pages.
5
Press 2 to enter its options and use
1 2 3 4 to make your selection.
➜
If the selection in the menu is grayed
out, that means the feature is not
available or not possible to change at the
current state.
6
Press 1 to confirm.
7
To exit, press SYSTEM-MENU.
System Menu - Preferences
TIPS: Underlined option is the factory default setting.
Press 1 to go back to previous menu item. Press SYSTEM-MENU to exit the menu.
Recording
For more information on this menu,
please see pages 37~39 “Recording
settings.”
YesDVD TM
For more information on this menu,
please see pages 41~43 “YesDVD setup
and software registration.”
Sound
DVD-VIDEO-TITLE 04|CO1
Sound
STOP
Preferences
Sound Mode
Night Mode
{ Sound mode }
You can select from the following settings
how sound will be played back by devices
connected to the analog outputs (L/R
AUDIO OUT.)
– { Stereo } : To hear sound from the left and
right audio channels. Use this setting when
the DVD recorder is connected to a stereo
TV.
– { Surround } : For audio device that is
compatible with Dolby Surround. Dolby
Digital and MPEG-2 multi-channel are
mixed to a Dolby Surround-compatible
two-channel output signal.
DVDR610_615_37_Engfinal434 8/16/04, 4:10 PM 57