Philips DVDR615 - Manual (Page 39)

39
English
3139 246 14221
Manual recording
Use the 'Manual recording' function to
start recording immediately (e.g., to
record a TV show already in progress.)
1
Turn on the TV power. Select the correct
Video In channel at the TV.
2
Insert a DVD+R(W).
➜ The contents of this disc is checked.
➜
If a DVD+RW was inserted that
already contains recordings, press 3 4
to select the location where the
recording should be started.
3
Press TUNER on the remote control to
see the TV programs, then press 3 4 to
select the program number you wish to
record.
●
To record from external device, press
button {0} on the remote control and
followed by 4 to select the correct input
channel that matches the socket to which
you connected to the DVD recorder.
➜
{ CAM 2 } : DV IN socket at the front
➜
{ CAM 1 } : S-VIDEO or VIDEO with
AUDIO L/R sockets at the front
➜
{ EXT 2 } : IN-EXT2, S-VIDEO (Y/C)
or VIDEO (CVBS) sockets at the back
➜
{ EXT 1 } : IN-EXT1, COMPONENT
VIDEO sockets at the back
4
Press REC 0 to start recording.
●
For DVD+RW disc, to prevent accidental
loss of recordings, hold down the
REC 0 until the message ‘
SAFE
RECORD’ appears on the display panel.
TIPS: To play a DVD+R on other DVD players, see “Finalizing disc (DVD+R)”. TIPS: Underlined option is the factory default setting.
Press 1 to go back to previous menu item. Press SYSTEM-MENU to exit the menu.
Recording
(cont’d)
Filter mode
For long play or extended play recording,
you can select a suitable filter mode to
optimize the video recording. The setting
does not influence high quality or
standard play recording mode.
1
Press 4 to select { Filter } and press 2
to enter its options.
2
Press 2 to select one of the options.
➜
{ Standard } : Recording quality is as
the recording mode selected.
➜ { Sport } : Improve recording of
images that move quickly. Optimize the
picture quality in record mode M3~M8.
3
Press 1 to confirm.
DVDR610_615_37_Engfinal434 8/16/04, 4:07 PM 39