beautypg.com

Installing the dvd recorder – Philips DVDR615 User Manual

Page 27

background image

27

English

3139 246 14221

Setting up VCR Plus+

®

channels

You need to program the DVD recorder
with your local channel information
before you can use VCR Plus+

®

programming system.

1

Press SYSTEM-MENU.

The system menu appears on the TV.

2

Press 4 repeatedly to select { Set-up .}

3

Press 2 repeatedly to select { Analog
Ch.
}

4

Press 4 repeatedly to select { VCR Plus+

Ch. } and press 2 to confirm.

5

Press 3 4 to select a VCR Plus+

®

channel number and press 2 to confirm.

VCR Plus+ Ch.

001 . . .
002 . . .
003 . . .
004 . . .
005 . . .
006 . . .
007 . . .

002 1 . .

6

Press 3 4 to select the VCR Plus+

®

TV

channel or use the alphanumeric
keypad 0-9
, then press 1 to confirm.

If you use the alphanumeric keypad 0-9,

enter the channel number as a three-digit
number. For example, for channel 18,
press 0, 1, 8.

Refer to the list from your local

newspaper or TV guide for the
VCR Plus+

®

channel numbers for your

area. These are the numbers you will
enter as the channel number as you
complete the selection.

7

Repeat steps

5

~

6

to search for other

TV channels.

Selecting the channel input signal

The DVD recorder will detect whether
you connected an Antenna or Cable TV
signal. If you are not receiving the
correct channels, you can use this
function to select the type of connection
you are using and allow the DVD
recorder to reset the channels.

1

Press SYSTEM-MENU.

The system menu appears on the TV.

2

Press 4 repeatedly to select { Set-up .}

3

Press 2 repeatedly to select { Analog
Ch.
}

4

Press 4 repeatedly to select

{ Connection } and press 2 to confirm.

5

Press 3 4 to select the connection the

TV is using.

{ Auto } : Select this to enable the

DVD recorder to detect the input signal
automatically.

{ Cable } : Select this if you connected

a cable signal.

{ Antenna } : Select this if you

connected an antenna signal.

6

Press OK to confirm.

The TV channel search starts.

Installing the DVD Recorder

(cont’d)

TIPS:

Press 1 to go back to previous menu item. Press SYSTEM-MENU to exit the menu.

DVDR610_615_37_Engfinal434

8/16/04, 4:05 PM

27

This manual is related to the following products: