PC Concepts SHG2 DP - Manual (Page 48)

Error Reporting and Handling Intel® SHG2 DP Server Board Technical Product Specification
Intel Order Number C11343-001 Revision 1.0 36
The BIOS logs the following SEL entries:
Table 26. BIOS Logging SEL List
Sensor Type
Sensor
Number
Sensor
Type
Code
Sensor-
Specific
Offset
Event
02h FRB1/BIST Failure
03h FRB2/Hang in POST failure
Processor 98h
99h
07h
05h Configuration Error (for DMI)
Memory 08h 0Ch 01h Uncorrectable ECC (If BMC not available)
POST Memory
Resize
A0h 0Eh - POST Memory Resize
POST Error 06h 0Fh - POST Error
System Event 87h 12h 00h System Reconfigured
04h PCI SERR Critical
Interrupt
07h 13h
05h PCI PERR
00h Initiated by power up
03h User requested PXE boot
System Boot
Initiated
A1h 1Dh
04h Automatic boot to diagnostic
00h No bootable media Boot Error A2h 1Eh
02h PXE Server not found
06h CMIC function 0 Errors
07h CMIC function 1-3 Errors
Chipset Specific
Critical Interrupt
A9h F4h
08h CIOBX2 #0 Errors
Table 27 below describes the various fields in the event request message, as sent by the BIOS.
(Regarding the detail, refer to the SHG2 Basic Input Output System (BIOS) External Product
Specification.)
Table 27. Event Request Message Event Data Field Contents
Event Trigger
Class
Event Data
Discrete 7:6 00 = Unspecified byte 2
01 = Previous state and/or severity in byte 2
10 = OEM code in byte 2
11 = Sensor specific event extension code in byte 2
5:4 00 = Unspecified byte 3
01 = Reserved
10 = OEM code in byte 3
11 = Sensor specific event extension code in byte 3
3:0 Offset from Event Trigger for discrete event state