beautypg.com

Selecting the flash mode, P.70), Press the b button in capture mode – Pentax MX4 User Manual

Page 72

background image

70

4

Tak

ing St

ill Pic

tures

d

R b c a

Flash Modes

1

Press the b button in Capture mode.

The flash mode changes each time the button is pressed and the icon
appears on the LCD monitor.
The camera is ready to take pictures in the selected flash mode.

Selecting the Flash Mode

(No

icon)

Auto

The flash discharges automatically depending on the

light conditions.

a

Flash Off

The flash will not discharge, regardless of the light

conditions. Use this mode to take pictures at dusk or in

museums etc. where flash photography is prohibited.

b

Flash On

The flash discharges regardless of the brightness.

c

Auto +
Red-eye reduction

This mode reduces the phenomenon of red eyes caused

by the light from the flash being reflected in the subject’s

eyes. The flash discharges automatically.

d

Flash On +
Red-eye reduction

This mode reduces the phenomenon of red eyes caused by

the light from the flash being reflected in the subject’s eyes.

The flash will discharge regardless of the light conditions.

• To use the flash, press the f button to make the flash pop up.

When the flash is closed, it will not discharge (Flash Off).

• The flash will not discharge (Flash Off) when the drive mode is set

to j or p or the focus mode is set to s or r.

• The flash discharges twice, first a pre-flash and then a second

time to take the picture. In the red-eye reduction modes, the

interval between the pre-flash and the main flash is longer.

• You cannot select Auto or Auto + Red-eye Reduction in a, b or

c

mode.

• Use the flash to prevent camera shake if a blinks when the

shutter release button is pressed halfway.

Saving the Flash Mode 1p.84

1