Pentax MX4 - Manual (Page 38)

36
2
Qu
ick Star
t
Quick Start
Taking Movies
The standard procedure for recording movies is described below.
1
Pull the grip out and rotate it into position.
2
Open the LCD monitor.
3
Press the power switch.
The camera turns on.
4
Press the C button.
Recording starts.
You can change the captured area by pressing
the Zoom/w/x lever to the right or left.
Press the lever gently to change the
captured area slowly and press it all the way
to change the area quickly.
x
: enlarges the subject.
w : enlarges the captured area.
5
Press the C button again.
Recording stops.
Using the Zoom 1p.52
• You are recommended to use a tripod to prevent camera shake when
taking pictures at a high magnification rate.
• The self-timer lamp lights during movie recording to show that
recording is in process.
• The LCD monitor swivel mechanism (1p.24) does not function during
movie recording.
• The zoom bar does not appear on the LCD monitor when zooming in
or out during movie recording.
• When the shutter release button is pressed during movie recording,
the focus is locked.
• Movie is recorded magnified about 1.2 times as large as still pictures.
Power switch
C button
Zoom/w/x lever
2 3 0 1 0 0 : :
C C