Philips Laserfax LPF 5120 - Manual (Page 57)

Service · Error Messages and Possible Causes 57
EN
Memory full Fax memory full! If the fax memory is full, no fax messages
can be received. Print the stored fax messages so that the de-
vice is ready to receive again.
Printer error An error has occurred during printing of the received fax
message.
Check whether the device cover is open.
Check whether the paper supply is empty (see also chapter
Insert Paper into the Paper Tray, page 23).
Check whether cartridge is empty (see also chapter Display-
ing the Toner Level, page 44 and Changing the Toner Car-
tridge, page 44).
Check to see whether a paper jam has occurred (see also
chapter Fixing a Paper Jam, page 46).
Received document error The received fax message is possibly incomplete Ask the
sender to check the length of the fax message. It is possible
the message is too long to be able to transmit in full.
No document to be polled In selected devices, no documents lay ready which could be
retrieved. Perhaps the sender’s device is not ready or the
document is no longer available.
Incompatible coding Fax transmission to mailbox: The mailbox number entered
does not exist at the recipient’s side.
Unknown Mailbox number Fax polling from a mailbox: The mailbox number entered
does not exist at the recipient’s side.
Error Messages on the Transmission Report Possible Cause(s)
lpf-5120-5125-5135-manual-uk-int-253117544-b.book Seite 57 Mittwoch, 16. Dezember 2009 10:01 10