Philips Laserfax LPF 5120 - Manual (Page 15)

Initial Operation · Initial Installation 15
EN
2 Switch the device on using the on/off switch on the
rear.
Spaltenumbruch
Initial Installation
Initial Installation
After you connect your device to the mains voltage, the
device starts. During the booting process, the lights flash.
Wait until the initial installation process begins.
Selecting the Language
1 Use [ to select the desired display language.
2 Confirm with OK.
Selecting the Country
Setting the Country Correctly
Setting the Country
1 Use [ to select the country in which you are operat-
ing the device.
2 Confirm with OK.
Set the Time Zone
Function is not supported in all countries and networks
(Function is not supported in all countries and
networks)
Set the Time Zone
In countries with several time zones, you can select from
preset time zones or manually enter the deviance of your
time zone from UTC (see also chapter on setting the time
zone, page 36). In countries with one time zone, the set-
ting is adjusted automatically if you set the country cor-
rectly.
1 Use [ to select the time zone in which you are oper-
ating the device.
2 Confirm with OK.
Automatic Changeover Between Summer Time/Winter Time
Spaltenumbruch
Entering Name
Page Header
Your name and number are added together with date, time
and page number at the top edge of each fax transmission
(= header).
1 Enter the name using the keys (A—Z).
2 Confirm with OK.
Entering Number
Entering Number
1 Enter your number.
Cursor Navigation 7
2 Confirm with OK.
Entering the Date and Time
1 Enter the date (two digits for each field), for example
31
¦05¦25 for May 31th, 2025.
2 Enter the time, e.g. 14 00 for 2 pm.
3 Confirm with OK.
CAUTION!
Setting the Country Correctly!
You must set the country in which you are oper-
ating the device. Otherwise your device is not
adapted to the telephone network. If your coun-
try is not included in the list, you must select a
different setting and use the correct telephone
cable for the country. Consult your retailer.
Notice
Automatic Changeover Between Sum-
mer Time/Winter Time
With setting the country and time zone, the
automatic changeover between summer and
winter time is switched on. The automatic
changeover is switched off if you enter the devi-
ance from UTC manually using the time zones
editor
Notice
Enter Letters
Enter capital letters by pressing and holding
ú
key. You can enter space using ½.
To insert special characters and symbols,
press ;ü. Press ûü to insert language spe-
cific special characters. Select with [. Con-
firm with OK.
You can move the cursor using [. Use C to
delete individual characters.
Notice
Enter Special Characters and Symbols
To insert special characters and symbols, press
;ü
. Select with [. Confirm with OK.
You can move the cursor using [. Use C to
delete individual characters.
lpf-5120-5125-5135-manual-uk-int-253117544-b.book Seite 15 Mittwoch, 16. Dezember 2009 10:01 10