Panasonic VL-G201 - Manual (Page 26)

26
Introduction and Installation
To attach the power cable
L
While pressing on the button with a pointed object such as a screwdriver, insert the power
cable into the terminal.
L
To disconnect the power cable, press on the button while pulling out.
L
To attach an optional power cable, cut off about 12 mm of the cable cover ( 1), then push
in firmly until the end of the cable is securely inserted into the power connection terminal
(
2).
To attach the wires
L Strip off of the wire cover so that about 9 mm of the wire is exposed.
L
While pressing on the button with a pointed object such as a screwdriver, insert the wire into
the terminal connector.
L
To disconnect a wire, press on the button while pulling out.
Monitor station DC terminal
1 2 Power cable cross section
Button
Terminal connector
Button
Terminal
connector
12 mm
Correct Incorrect
Button Terminal connector
G201CE(E).book Page 26 Friday, November 11, 2005 4:46 PM