Basic operations, Sending documents via lan – Panasonic 3000 User Manual
Page 62
BASIC OPERATIONS
62
(see Note 1) (see Note 2) (see Note 3) (see Note 4) (see Note 5) (see Note 6)
5
The document(s) begin to store into memory with a file
number.
Then starts connecting to the LAN immediately after
storing the first page. (See Note 6)
While sending the document(s) via LAN, the remaining
page(s) continue to store into memory.
NOTE
1. If your machine sounds an alarm (pi-pi-pi) when pressing the KEYBOARD Button or any Phone Book entries that
contain an email address, one or more of the required 5 Basic Internet Parameters may have been omitted in the
User (Internet) Parameter(s). (See page 25)
2. If you want to specify two or more destinations, press
or after completing the full email address so you
can select another destination.
3. If the transmission can not be completed for any reason, the email may be returned undelivered, otherwise no
reply will be printed.
4. For the machine to perform the email address completion the Fax Parameter No. 160 (DEFAULT DOMAIN) must
be set to "Valid" and the DEFAULT DOMAIN must be preprogrammed in the Setting the Internet Parameters (see
page 57).
5. To use the
key efficiently, the Selectable Domains must first be preprogrammed in the User (Internet)
Parameters (see page 27).
6. The "Quick Memory Transmission" is disabled if multipe stations are set.
MEMORY XMT NO.026
PAGE= 01 00%
[email protected]
JOB
STATUS
MEMORY XMT
ORIGINAL
LIGHTER DARKER
1/1
AMERICA
ASIA
CHINA
AFRICA
BERLIN
ANTARCTICA BRAZIL
APOLLO
CANADA
KEYBOARD
OK
Sending Documents via LAN