Panasonic 3000 - Manual (Page 27)

INSTALLING YOUR MACHINE
IN
S
T
ALLING
Y
O
UR M
ACHINE
27
Setting the Internet Parameters
Setting the User Parameters for the LAN Interface
Depending on how the DP-2500/3000 will be configured to communicate on the LAN, the appropriate
parameters listed in the table below must be stored first. (See pages 12 to 17)
* Contact your Network Administrator for this Information.
Parameter Comments
1 DATE & TIME Current Date and Time.
2 LOGO Up to 25 characters & digits.
3 CHARACTER ID Up to 16 characters & digits.
4 ID NO. Your Fax Telephone Number. (Up to 20 digits)
5 TIME ZONE The Time Zone is required as part of the Email header information when
sending Internet faxes.
6 (MAC ADDRESS) Hardware Address hard-coded into the DP-2500/3000. (If required, can be
obtained from the 2nd page of the Fax Parameter List printout, by pressing.
[FUNCTION][PRINT OUT][04 FAX PARAMETER LIST])
7* IP ADDRESS IP Address assigned to your DP-2500/3000.
8* SUBNET MASK Subnet Mask assigned by the Network Administrator.
9* SMTP SERVER NAME The name of the SMTP Mail Server. (Up to 60 characters)
10* SMTP SERVER IP ADDR IP Address of the SMTP Mail Server.
11* DEF. ROUTER IP ADDR IP Address of your Default Router.
12* EMAIL ADDRESS The Email Address assigned to your DP-2500/3000 for sending and receiving.
(Up to 60 characters)
13* DNS SERVER IP ADDRESS IP Address of the DNS Server. If the DNS Server is not available, change the
setting of the Fax Parameter No. 161 (DNS SERVER) to "Invalid", then enter
the IP Address instead.
14* POP SERVER NAME Name of the POP Mail Server.
15* POP SERVER IP ADDR IP Address of the POP Mail Server.
16* POP USER NAME User Name assigned to your DP-2500/3000. (Up to 40 characters)
17* POP PASSWORD Password assigned to your DP-2500/3000. (Up to 10 characters)
18* HOST NAME The Host Name assigned to your DP-2500/3000. (Up to 60 characters)
19 DEFAULT SUBJECT The default information to be added to the Subject Line for all outgoing Email
(up to 40 characters). To manually input this information before transmission,
change the Fax Parameter No. 159 (SUBJECT LINE ENTRY) to "2:Valid".
20 DEFAULT DOMAIN When the outgoing email address is incomplete by SMTP standards, the
Frequently Sent Domain specified here will be automatically added to the
email address. This feature is also useful as a shortcut when manually
entering email addresses to a frequently used Domain. (Up to 50 characters)
21 SELECTABLE DOMAINS Enter up to 10 Domain Names that can be selected during Manual email
addressing by pressing the Domain Key
(See page 16). (Up to 30
characters)
22 REMOTE PASSWORD This is a security password that allows Remote Programming of the Internet
Parameters and Auto Dialer or the retrieval of the Journal via an Email. (Up to
10 characters)
23 MANAGER’S EMAIL ADDR Department Manager’s Email Address for notification of all Internet relayed
transmissions for supervision and cost control purposes. (Up to 60 characters)
24 RELAY XMT PASSWORD A password that provides Network security for your Relay Station (used
exclusively for G3 relay purposes). (Up to 10 characters)
25 RELAY DOMAIN (01) ~ (10) Enter up to 10 Domain Name(s) that have been authorized to access your
Internet Fax for Relayed XMT Request. (Up to 30 characters)
Relay Domain, a.k.a. Domain Name in the DX-1000/2000.