Philips SDR-S50 - Manual (Page 82)

82
VQT2L35
≥ Connect this unit to a DVD burner, use the joystick to select [PLAY DISC], then press
the centre of the joystick (l 77)
∫ Formatting discs
This is for initializing DVD-RAM and
DVD-RW/+RW discs.
Please be aware that if a disc is
formatted, then all the data recorded on
the disc will be erased. Back up
important data on a PC etc.
Select the menu. (l 23)
≥ After formatting is complete, press the
menu button to close the message screen.
≥ Connect this unit and the DVD burner to
format discs. You may no longer be able to
use the discs if you format them on
another device such as a PC etc.
∫ Auto protect
You can protect (write protect) a DVD-RW
disc when copying still pictures.
1
Select the menu. (l 23)
≥ If a disc that you copied to is inserted in
another device without protecting it, a
message may be displayed prompting you
to format the disc. We recommend setting
[AUTO PROTECT] to [ON] in order to
prevent accidental deletion.
2
Copy to the disc. (l 79)
≥ After copying, the disc is write protected.
To release the disc protection
Select the menu. (l 23)
≥ After successfully releasing [AUTO
PROTECT], press the MENU button to
close the message screen.
∫ Displaying disc information
Information such as the type of recorded
disc, the number of recorded scenes and
whether or not the disc is finalized is
displayed.
Select the menu. (l 23)
≥ Press the MENU button to exit the
information screen.
Managing the copied disc
[DISC SETUP] # [FORMAT DISC]
[DISC SETUP] # [AUTO PROTECT] #
[ON]
[DISC SETUP] # [CANCEL PROTECT]
[DISC SETUP] # [DISC STATUS]
SDRS50&H85GN-VQT2L35_mst.book 82 ページ ２００９年１２月２９日 火曜日 午前１０時３０分