Philips SDR-S50 - Manual (Page 20)

20
VQT2L35
Caution:
Check that the access lamp has gone off.
1
Open the LCD monitor.
2
Open the SD card cover and insert (remove) the SD card into (from)
the card slot.
≥ Face the label side B in the direction shown in the illustration and press it straight in as far
as it will go.
≥ Press the centre of the SD card and then pull it straight out.
3
Securely close the SD card cover.
≥ Do not touch the terminals on the back of the SD card.
≥ See page 110 for details on handling the SD card.
Inserting/removing an SD card
When using an SD card not from Panasonic, or one previously used on other equipment,
for the first time on this unit, format the SD card. (l 74) When the SD card is formatted, all
of the recorded data is deleted. Once the data is deleted, it cannot be restored.
Access lamp [ACCESS] A
≥ When this unit is accessing the SD card, the access lamp lights up.


SDRS50&H85GN-VQT2L35_mst.book 20 ページ ２００９年１２月２９日 火曜日 午前１０時３０分