Philips DVDR3588H/93 - Manual (Page 54)

E
n
g
li
sh
55
TIPS: No further recording and editing can be carried out on a finalized recordable DVD.
Press DVD to return to the index picture screen.
Edit Recordings - Recordable DVD
(continued)
Rename disc
The original disc name is generated
automatically by the recorder. You
can change the disc name by following
the steps below.
A In disc editing menu, use  keys to
select { Rename Disc } and press OK.
 The keyboard screen appears.
B Use   keys to highlight a
character on the keyboard and press OK
to select.
 The maximum input is up to 12
characters.
l You can use the following keys on the
keyboard screen to edit your input:
BkSp : to remove a character to the
left of the cursor.
Space : to create a space between
characters.
Aa : to toggle between upper and
lower case characters .
Clear : to clear the entry field
completely.
Exit : to exit the keyboard screen.
C To confirm your entry, select
OK OK on
the keyboard and press OK.
 The info panel is now updated.
l To exit, select Exit on the keyboard
and press OK.
Erase disc (DVD±RWs only)
This erases the content of the
DVD±RW disc excluding those that was
not recorded on this recorder. Once
the existing content is erased, it can be
used for recording.
A In disc editing menu, use  keys to
select { Erase Disc } and press OK.
B Select
OK YES
in the menu to proceed
or
OK NO
, to abort, then press OK to
confirm.
Helpful Hint:
– To erase content that cannot be played
back on this recorder, please use the option
{Erase Disc } under the SETUP MENU
－
HDD.
Record a new title
This function allows you to start a new
recording at the remaining empty space
in the DVD recordable disc.
A In disc editing menu, use  keys to
select { Record New Title } and press
OK.
B Select the source you want to record
from and press REC l to start
recording.
Overwrite disc (DVD±RWs only)
This function allows you to start a new
recording from the beginning of a
DVD±RW
regardless of the contents of
the disc.
A In disc editing menu, use  keys to
select { Overwrite disc } and press OK.
B Select the source you want to record
from and press REC l to start
recording.