Philips DVDR3588H/93 - Manual (Page 31)

E
n
g
lis
h
32
Before Recording
(continued)
TIPS: Press  to go back to previous menu item.
Press SETUP to exit the menu.
HDD settings (underlined options are the factory default settings)
This option allows you to control the behavior of the Time Shift
Buffer.
{ No } – Select to clear the contents in the temporary HDD
storage.
{ Yes } – Select to retain the contents in the temporary HDD
storage when you switch external video input source.
Press OK to options information on:
– Video Pantition(**% remaining)
– Free Recording Time( HQ) **:**:**
– Free Recording Time( SP) **:**:**
– Free Recording Time( SLP) **:**:**
– Date Partition(**% remaining)
– Free Space **GB
This option determines how the recorder will respond when
the HDD is full of recordings.
{ Automatic }–During recording, when the HDD is full, the
recorder will proceed to overwrite any unprotected
recordings in the HDD. The oldest unprotected
recordings will be deleted first.
{ Manual } – During recording, when the HDD is full, recording
will be stopped. A warning message { The hard disk
is full. Please erase some programs to allow
further recording. } will appear on the screen.
This option will erase all marked/ unmarked recordings on the
HDD. This option is not available when recording to HDD is in
progress.
l Press OK.
 A warning message will appear. Select OK OK to proceed or
OK CANCEL to abort. Once complete, the recorder will restart.
This option will erase all content on a DVD±RW disc, including
those that were not recorded on this recorder. This option
is only available in tuner mode.
l Press OK.
 A warning message will appear. Select OK OK to proceed or
OK CANCEL to abort.
Save Time Shift
Buffer
HDD Info
Space Management
Delete HDD
Erase Disk