P.86), Press the four-way controller ( 5 ) in a mode, Press the four-way controller ( 23 ) – Pentax Optio W20 User Manual
Page 88: Press the 4 button, Manual focus
86
4
T
aking
Pictu
res
The procedure for setting the focus manually (\) is described below.
1
Press the four-way controller (5)
in A mode.
2
Use the four-way controller (5) to
select \ and press the 4 button.
The central portion of the image is
magnified to fill the screen of the LCD
monitor when focusing.
3
Press the four-way controller
(23).
The \ indicator appears on the LCD
monitor to indicate the approximate
distance to the subject. Use the four-way
controller (23) to adjust the focus using
the indicator as a guide.
2
: for distant focus
3
: for closer focus
4
Press the 4 button.
The focus is fixed and the camera returns to capture status.
In addition, the focus position is fixed five seconds after you remove
your finger from the four-way controller (5).
After the focus is fixed, you can press the four-way controller (5) again
to display the \ bar and readjust the focus.
• In y mode, the focus mode is set to s.
• In 9 mode, you can only select = and q.
Manual Focus
To switch from \ to another focus mode, press the four-way
controller (5) while the \ bar is displayed.
Capture mode and drive mode cannot be changed while the \ bar
is displayed.
F o c u s M o d e
F o c u s M o d e
F o c u s M o d e
M a n u a l F o c u s
M a n u a l F o c u s
M a n u a l F o c u s
OK
O K
O K
O K
OK
O K
O K
O K
3 8
3 8
3 8
2m
2m
0.5
0.5
1
1
2m
0.5
\
indicator