P.107) – Pentax Optio W20 User Manual
Page 109
107
4
T
aking
Pictu
res
4
Press the shutter release button fully.
Recording starts.
5
Press the shutter release button fully.
Recording stops.
If you keep the shutter release button pressed for more than one second,
recording will continue for as long as you keep the button pressed.
Shooting stops when you take your finger off the shutter release button.
Press the Green button during movie recording to take still pictures while
continuing to record the movie. After the Green button is pressed, a still
picture is taken and stored.
• The flash will not discharge in C mode.
• In C mode, the default setting for focus mode is 3. (p.85)
The focus mode can be changed before recording starts.
• When the Focus Mode is set to \, you can adjust the focus before
recording starts and during recording.
• You can use the optical zoom and digital zoom before recording
starts and during recording.
• Changing the LCD monitor display mode by pressing the
4/W button while recording a movie will not display the
histogram.
Setting the Optical Zoom 1p.113
Keeping the Shutter Release Button Pressed
Taking Still Pictures During Movie Recording (Still picture capture)
When the battery level indicator is at
(battery is exhausted), the
flash will not discharge when taking still pictures during movie
recording.