beautypg.com

Care to be taken during handling – Pentax Optio W20 User Manual

Page 5

background image

3

• If lightning should be present during use of the battery charger or AC

adapter, unplug the power cord and discontinue use. Continuing to use the
product can cause damage to the equipment, fire or electrical shock.

• Wipe off the plug of the power cord if it should become covered with dust.

This can cause a fire.

Caution

• Do not place heavy objects on the AC plug cord, allow heavy objects to

drop onto it or allow the AC plug cord to become damaged due to
excessive bending. If the AC plug cord becomes damaged, consult a
PENTAX Service Center.

• Do not short or touch the output terminals of the product while it is still

plugged in.

• Do not plug in the AC plug cord with wet hands. This can cause an

electrical shock.

• Do not subject the product to strong impacts or allow it to drop onto a hard

surface. This can cause a malfunction.

• Do not use the battery charger to charge batteries other than rechargeable

lithium-ion battery D-LI8. This can cause overheating or malfunctions.

• Take the Worldwide Service Network listing that is included in the package

with you when traveling. This will be useful if you experience problems
abroad.

• When the camera has not been used for a long time, confirm that it is still

working properly, particularly prior to taking important pictures (such as at
a wedding or during traveling). Contents of the recording cannot be
guaranteed if recording, playback or transferring your data to a computer,
etc. is not possible due to a malfunction of your camera or recording media
(SD Memory Card), etc.

• The lens on this camera is not interchangeable. The lens is not removable.
• Do not clean the product with organic solvents such as thinner, alcohol or

benzene.

• Places of high temperature and humidity should be avoided. Particular

care should be taken regarding vehicles, which can become very hot
inside.

• Storing the camera where pesticides and chemicals are handled should be

avoided. Remove from case and store in a well-ventilated place to prevent
the camera from becoming moldy during storage.

Care to be Taken During Handling