Pentax Optio E70 - Manual (Page 84)

82
3
Tak
ing Pi
cture
s
5
Press the 4 button.
The frame appears on the display.
When the camera recognizes a face, the
Face Recognition function is activated and
the face recognition frame appears (p.65).
6
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
7
Press the shutter release button fully.
The picture is taken.
• In p mode, recorded pixels is fixed at h (2048 × 1536).
• At shipment, the camera includes 3 default frames and 87 optional
frames built-in. (The CD-ROM supplied with the camera contains a
total of 90 frames, including the default frames.)
Optional Frames
The optional frames are stored in the built-in memory in the Optio E70. These
optional frames are deleted if the camera settings are reset or if the built-in
memory files are deleted with a computer. To reload the optional frames into the
built-in memory, copy the files from the CD-ROM (S-SW87) supplied with the
camera (p.143).
Adding a Frame to a captured image 1p.141
3 8 3 8 3 8
1 4 : 2 5 1 4 : 2 5 1 4 : 2 5
0 2 / 0 2 / 2 0 0 9 0 2 / 0 2 / 2 0 0 9
e_kb477.book Page 82 Thursday, November 20, 2008 4:21 PM