Premier Mounts CPD10WALLARM - Manual (Page 9)

CPD10WALLARM
Installation Instructions Visit Premier Mounts website at http://www.mounts.com Page 9
Adjustable Mounting Bracket Installation (cont.)
  Secure and fi ngertighten two (2) M6 x 16mm
security head screws.
If the adjustable mounting bracket needs to be
adjusted, the four (4) M6 x 12mm security screws
may be loosened so that the bracket can be
moved ±2˝. Fingertighten all hardware.
Do not tighten the mounting hardware at this time.
Proceed to the "Base Box Installation" section.
Security
Wrench
Step 2
Base Box Installation
Step 1
  Raise the base box to the upper mounting
bracket.
  Align the two (2; one each side) mounting holes.
  Using a security wrench, insert and tighten two (2)
M6 x 12mm security head screws.
  Attach the projector to the base box, referring to
the projector bracket installation instructions.
Proceed to the "Projector Bracket Installation"
section.
The M6 x 12mm security head screws must be
mounted from the underside of the base box.
Do not overtighten the screws.
Base Box
M6 x 12mm Screws
Security Wrench
Adjustable Mounting
Bracket