Premier Mounts CPD10WALLARM - Manual (Page 12)

CPD10WALLARM
Page 12 Visit Premier Mounts website at http://www.mounts.com Installation Instructions
The storage feature may be used to store electronic components. There is an accessible door on each side of the
storage enclosure. It may be securely held shut with the use of four (4) M5 x 8mm security head screws. It may be easiest to
pre-wire all cables down the arm (or extension) at this time.
Electronic
Components
Electronic
Components
Door
Door
Security
Wrench
M5 x 8mm
Security
Screw
  Open the storage door that is located on the
side of the wall plate.
  Place the electronic components inside the
storage enclosure.
  Make all electronic connections at this time.
  Close the storage door and secure using two
(2; 1 upper and 1 lower) M5 x 8mm security
head screws. Tighten using a security wrench.
  Repeat this process for the remaining side as well.
Proceed to the "Cable Management" section.
Utilizing the Storage Feature
Step 1
Step 2