System menu options, Sound settings, Disc settings – Philips DVDR5350H User Manual

Page 73

System Menu Options

(continued)

System Menu Options

Sound settings

(underlined options are the factory default settings)

Sound mode

This setting is only required if you used the recorder’s AUDIO OUT L/R
sockets to connect other audio/video device.

{ Stereo }

– Select this to hear the sound from the left and right

audio channels. Use this setting when this recorder
is connected to a TV or Stereo system.

{ Surround }

– Select this if the connected audio/video device is

compatible with Dolby Surround. Dolby Digital and
MPEG-2 multi-channel are mixed to a Dolby
Surround compatible two-channel output signal.

Night mode

This mode optimises playback of sound at low volume. High volume

outputs will be softened and low volume outputs are brought upward to
an audible level.

{ On }

– Turns on night mode.

{

Off }

– Turns off night mode feature. Selects this to enjoy

the surround sound with its full dynamic range.

Disc settings

Adapt menu

If a DVD±RW has been recorded in a computer drive or in another

recorder, the Picture Index screen may not be displayed correctly. This

feature allows you to change the format of the disc to ‘Philips’ type.

Once you press OK, a message to conﬁrm your action will appear on the
TV.

Delete all

Select this to delete all the recordings from the current recordable DVD.

Once you press OK, a message to conﬁrm your action will appear on the

TV.

dvdr5350H_EU_Eng537.indd 73

2005-09-16 2:27:41 PM