Philips DVDR5350H - Manual (Page 38)

E
n
g
lis
h
38 39
Record to Hard Disk
(continued)
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 35.
Direct recording from TV
If you have connected this recorder to
your TV using a scart cable, you can
immediately start recording the
programme which is currently being
shown on the TV while the recorder is in
standby mode.
A Ensure that the { Direct rec. } mode in
the recording setting is turned on (see
page 35).
B While watching the TV programme, press
REC  on the remote control to start
recording.
C To stop recording, press STOP  .
 Otherwise, it will stop automatically
after six (6) hours of recording.
Helpful Hint:
– Direct recording is not possible from the
device connected to the EXT2 AUX I/O scart
socket.
Automatic recording from
Satellite Receiver
The feature is only applicable for the
Satellite Receiver (or any similar devices)
that is connected to the EXT2 AUX-I/O
scart socket of this recorder. In addition,
the Satellite Receiver must have a timer
function that is able to control the
recording function of this recorder.
A Ensure that the { Sat record } mode in
the recording setting is set to { EXT2 }
(see page 35).
B Use the Satellite Receiver’s timer
programming function to programme the
recording (refer to the Satellite
Receiver’s user manual).
C Leave the recorder and Satellite Receiver
in standby mode for the recording.
 You have to turn off the Satellite
Receiver to standby mode before the
recorder.
 The recorder will start recording
when it detects a signal from the Satellite
Receiver.
Helpful Hint:
– The recorder’s timer recordings take
precedence over automatic satellite recording.
Automatic Satellite recording will stop if the
recorder’s timer recording is due to start.
dvdr5350H_EU_Eng537.indd 38 2005-09-16 2:26:03 PM