Pioneer DVR-RT501-S - Manual (Page 80)

80
En
Dubbing 07
You can connect another VCR or
camcorder for dubbing.
Typical connection: When using this
unit as a recording device
See next page for the diagrams of
connection.
NOTES:
• When this unit is used as a
playback device, any on screen
displays that appear would also
appear on the recording.
However it is possible to set the
on screen display to OFF - see
the “DISPLAY/CALL” section on
page 24 for more information.
• If no special permission is
obtained from the copyright
owner, videos recorded from TV
programs or movies can only be
used for your own personal
enjoyment.
• You may not dub a copy pro-
tected video tape or DVD disc.
Dubbing using other equipment
VR mode Video mode DVD-R
VCR
2
Press REC MODE/SPEED and select the recording mode.
VCR: SP or LP (See page 46.)
DVD: SP, LP, EP or XP (See page 50.)
3
Press REC on this unit.
4
Press the PLAY button on the playback device.
5
To stop dubbing, press STOP.
When a video is recorded using this unit
Preparation:
• Turn ON the TV and select its AV channel (this may be labelled
EXT / AUX etc.).
• Load a video tape where the erase-protection tab is not activated
or a disc with enough recording space.
• To record onto a video tape, set the unit to VCR mode, whereas to
record onto a disc, set it to DVD mode.
1
Press INPUT SELECT and set the channel to A3 (or A2).
A2: DECODER/EXTERNAL scart on the rear panel
A3: AUDIO/VIDEO input on the front panel
Confirm that A3 (or A2) appears on the display window.
2H30301B_En_78_81 8/4/05, 19:26 80