Pioneer DVR-RT501-S - Manual (Page 56)

56
En
Recording 05
4
Press to highlight TUNER CH NO., then enter the corre-
sponding tuner channel number.
• Select a tuner channel number in the same way as you
selected the guide channel number.
• You can also select one of the external inputs (AV1, AV2 or
AV3) instead of a channel number if some channels are
received via an external receiver.
5
Repeat steps 3 – 4 to input the rest of the channel list.
6
Press to highlight OK and press ENTER.
7
When you’re done, press SETUP to exit.
Setting the timer program using the VIDEO
Plus+ system
The VIDEO Plus+ system simplifies timer recording so that you just enter a
PlusCode number (which you can find in your TV listings guide) for the
program you want to record, tell the recorder whether you want to record it
just once or regularly, and then select the DVD or the VCR for recording.
Note that for the VIDEO Plus+ system to work correctly, the clock must be
set to the right time and the guide channels must be setup. (See “Checking
the channel setup to use the VIDEO Plus+ system” on page 55.)
1
Press VIDEO Plus+.
If a PROGRAM FULL message appears then you’ll need to
delete one of the existing timer programs before continuing.
Select a timer program from the list and press CANCEL.
2
Use the numeric keys to enter the PlusCode number.
TIMER REC SET
SYSTEM SETUP
AV SETUP
REC SETUP
CHANNEL SETUP
OTHER
SETUP MENU
ENTER RETURN ENTER
CANCEL DELETE
BACK END
SELECT
SETUP
INPUT NO. 0 - 9
CHANNEL SETUP
CH TUNING
AUTO TUNING
GUIDE CH SET
PROCEED
PROCEED
PROCEED
TV/CATV SELECT
AUTO CH MEMORY
ADD/DELETE
GUIDE CH SET
GUIDE CH NO.
TUNER CH NO.
OK
01
- -
RETURN
CANCEL
VIDEO
Plus+
DELETE
BACK END
SELECT INPUT NO. 0 - 9
VIDEO Plus+
PlusCode#
TYPE
OK
ONCE
1 - - - - - - - -
2H30301B_En_54_62 8/4/05, 19:24 56