Philips FW-D5D - Manual (Page 26)

3139 116 19774
26
English
DVD-VIDEO
3 Move to Parental Control using the
4 or 3 keys.
4 Move to VALUE ADJUSTMENT (1-
8) using the 2 key.
5 Then use the 4 or 3 keys or the
digit keys (0-9) on the remote
control to select a rating from 1 to 8
for the disc inserted.
Rating 0 (displayed as ‘– –’):
Parental Control is not activated. The
Disc will be played in full.
Ratings 1 to 8:
The disc contains scenes not suitable
for children. If you set a rating for the
player, all scenes with the same rating
or lower will be played. Higher rated
scenes will not be played unless an
alternative is available on the disc.
The alternative must have the same
rating or a lower one. If no suitable
alternative is found, play will stop and
the 4-digit code has to be entered.
6 Press OK or 1 to confirm, then
press 1 again to exit the menu.
Country
1 When disc playback is stopped,
select ACCESS CONTROL in the
Features menu using the
4 or 3
keys.
2 Enter the 4-digit code.
3 Move to CHANGE COUNTRY
using the 4 key.
4 Press the 2 key.
5 Select a country using 4 or 3.
6 Press OK or 1 to confirm, then
press 1 again to exit the menu.
Changing the 4-digit code
1 When disc playback is stopped,
select ACCESS CONTROL in the
Features menu using the
4 or 3
keys.
2 Enter the old code.
3 Move to CHANGE CODE using the
4 key.
4 Press the 2 key.
5 Enter the new 4-digit code.
6 Enter the code a second time and
reconfirm by pressing OK.
7 Press 1 to exit the menu.
If you forget your 4 digit code
1 Press
9 to exit ‘Child Protect’ screen.
2 Select ACCESS CONTROL in the
Features menu using the 3 and 4
keys.
3 The 4-digit code can be cancelled by
pressing 9 four times in the ‘Access
Control’ dialog.
4 You can then enter a new code
(twice!) as described above
(Changing the 4 digit code).
Parental Control Disclaimer
This DVD player features the
PARENTAL CONTROL system which
is intended to activate when playing
DVD discs made with certain software
coding. This is according to technical
standards adopted by the set maker
and disc content industries.
Please note that the PARENTAL
CONTROL system will not operate if
the DVD disc does not have the
appropriate software coding. Also note
that at the time of release of this DVD
player, certain aspects of the said
technical standards had not been fully
settled among the set maker and the
disc content industries.
On this basis, Philips cannot warrant
functioning of the PARENTAL
CONTROL system and disclaims any
liability of unintended watching of disc
content.
If in doubt, please check the system
with the disc before you allow children
access or apply to the relevant disc
publisher for more information.
Operation
Loading discs
1 Press OPEN/CLOSE 0 on the
front of the player. The disc tray
opens.
2 Load your chosen disc in the tray,
label side up (also when a double
sided DVD is inserted). Make sure it
is sitting properly in the correct
recess.
3 Gently push the tray, or press
OPEN/CLOSE 0 to close the
tray.
™ "READ" appears in the status
window and on the player display,
and playback starts automatically.
Notes:
– If ‘Child Lock’ is set to ON and the disc
inserted is not in the ‘child safe’ list (not
authorized), the 4-digit code must be
entered and/or the disc must be
authorized. (see ‘Access Control’)
– The DVD tray will open or close only
when the system is in DVD mode.
pg 01-43/D5/37-Eng 7/13/00, 11:51 AM 26