Philips FW-D5D - Manual (Page 17)

3139 116 19774
17
English
OPERATING THE SYSTEM
Personal Setting
You can adjust the personal setting to
your desired level with the JOG control.
1 Press and hold PERSONAL for
about five seconds to switch on the
personal setting mode.
™ "SELECT PRESET NUMBER" will
be displayed.
2 Adjust the JOG to select the desired
preset number for personal setting
and press á to confirm the
selection.
™ "ADAPT LOW FREQ LEVEL" will
be displayed.
3 Adjust the JOG to select the desired
Spectrum Analyzer band level for
low frequency.
™ The level will increase or decrease
between+3 and -3.
4 Press á to confirm the selection.
™ "ADAPT MID FREQ LEVEL" will
be displayed, followed by " ADAPT
HIGH FREQ LEVEL".
• Repeat step 3 - 4 to select the
desired middle and high frequencies
of the Spectrum Analyzer band levels.
5 You can edit the name for the
personal setting.
™ The first character of the setting
name will be flashing.
6 Adjust the JOG to select the desired
letter, number or symbol.
™ "A to Z", "0 to 9" or "*, -, +, \, /, _".
7 Press á to confirm the selection.
™ The next character for editing will
be flashing.
• Repeat steps 6 - 7 to store up to 10
characters.
8 To store the setting, press
PERSONAL again.
• Before storing the setting, you
can press à to retrace the
steps.
• To exit without storing the
setting, press Ç.
Notes:
– During personal setting, if no button is
pressed within 90 seconds, the system
will exit personal setting mode
automatically.
– It is not possible to adjust the DBB
level during personal setting, " USE
JOG" will be displayed.
DIGITAL SOUND CONTROL
(DSC)
The DSC feature enables you to adjust
the system to suit your type of music.
1 Press to select the DSC feature.
2 Adjust the JOG to select the
desired DSC setting : OPTIMAL,
CLASSIC, TECHNO, VOCAL, ROCK
or JAZZ.
™ The selected digital sound is
encircled.
™ "OPTIMAL, CLASSIC, TECHNO,
VOCAL, ROCK or JAZZ" will be
displayed.
Note:
– For a neutral setting, select CLASSIC.
DYNAMIC BASS BOOST (DBB)
There are three DBB settings to
enhance the bass response.
1 Press to select the DBB feature.
2 Adjust the JOG to select the
desired DBB level : BEAT, PUNCH or
BLAST.
™ The DBB LED will be lit.
™ “BEAT”, “PUNCH” or “BLAST” will
be displayed.
To switch off DBB
1 Press DBB briefly.
2 Adjust the JOG until “
DBB OFF” is
displayed.
Note:
– Some CDs might be recorded in high
modulation, which causes a distortion
at high volume. If this occurs, switch off
DBB or reduce the volume.
Automatic DSC-DBB / VEC-DBB
selection
The best DBB setting is generated
automatically for each DSC or VEC
selection. You can manually select the DBB
setting that best suits your listening
environment.
pg 01-43/D5/37-Eng 7/13/00, 11:50 AM 17